IMPACT OF STORES FUNCTION IN PROFITABILITY OF AN ORGANIZATION
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 6,911 times
Delivery: Within 24 hoursABSTRACT
Stores function is one of the responsibilities any organization. Thereby facilitating the organizational activities.
Presently, it has been given status of a department in order to enable it achieve her numerous objectives.
Store functions are major functions for the successful implementation of organization goods. This their perceptions as to the effective and future development of stores functions in the Rokana Industry Nekede.
The study therefore to investigate the prospects and problem of stores functions (A case study of Rookana industry Nekede).
The researcher looked into the proportion of the personnel with appropriate knowledge of the practical stores management philosophy and objective in an organization the stores functions policies and procedures surrounding stores functions management, and the general expectations of prospects of store function management in the Rokana industry.
Questionnaires was contributed and distributed to the relevant staff of the Rokana industry Nekede. The data collected was analyzed and the result should that:
(1) A supplicant number of the staff demonstrated ignorance of the store function in an organization.
(2) Most of them are inexperienced in the discipline.
(3) Most of the staff are interested in st0oring without every belonging to any of the stores function professional bodies to be trained in the job.
Based on the above mentioned discoveries, are following recommendations were suggested.
(i) In-service training, retraining workshops refresher course and seminars should be organized for the staff of the department.
(ii) Adequate financial assistance be given to the department
(iii) Stores functions responsibility should be fixed with an single department head.
(iv) Experienced qualified staff should be employed
(v) Storing policies for Rokana Industry Nekede should be made and pass into law under close supervisions.
CHAPTER ONE
1.0 INTRODUCTION
In most industries, the activities covering the stores function are spread throughout all in organization. And may also speed to suppliers, customers and the distribution chain. Stores functions on is also a vital part of all industrial organization, public and private utility organization and armed services. It is s function that is set up in any concern to assist in the production of goods and services and no industrial unit or public undertaking of substantial size can be effective9ly managed without it. The store which can be universally applied to all organizations as their needs vary, but in the course of time, certain principles and practices of more or less general application have been evolved.
The store which is mostly an organization where all types of material needed for production distribution maintenance, packaging etc. are received stored and issued.
The store functions is actually concerned with holding stocks.
1.1 BACKGROUND OF THE STUDY
According to the proprietor of Rokana industries limited Engr. Ugwu when contacted said that the first idea to start that business came into his mind in 1978. he went further by saying that he was battling on how to start off in terms 0of raising fund. He did mention of vicious cycle of poverty which means that an entrepreneur may have idea of a particular business to embark upon but the problem becomes inadequate initial capital to take off.
According to engr. Ugwu, Rokanna industry limited was fully established in 1982 and produce body jelly, tooth brushes, air fresheners, uzzi water and also refilling of gases. The industry employed about 40% cocu raw materials and 60% of foreign inputs. Though they value added process. What the director called value added process.
Population has increased considerably with rampant cases of products of low quality.
1.2 STATEMENT OF PROBLEM
The organizations which utilizes the functions of abobve such a federal, state and local government organizations, and armed serves and the private and public and public utilities faces the problem that raise from above functions. The material products and services were p0rovided at very high and influenced prizes which is not even computable with suitable quality and safety. However, with help of the br9ight prospects and less problems with services selected by the above function.
Store function is necessary in almost every organization from the private household to federal, state and local government as well as industries. These organizations are involved in business transaction at various levels and as such are left to decide if their potentials suppliers are the most reliable economical and trustworthy of those in the market place.
1.3 OBJECTIVE OF THE STUDY
this project is a survey of the problem –of products quality control Rokanna industries limited in Owerri. The main objective is to examine the oqresent status of the control of the quality product in this company, so that the strength and weakness and not also the factors affecting development can be determined so as to provide a sound base for a more ositive future approach.
It will help review and store some dominant materials or item, which will help item, produce products at that are satisfactory, adequate dependable and economical. Also it will help the company to realize and achieve the fullest potential of programmes in the company.
It helps in restoring of products that is ready for distribution before the distribution time the finished products.
1.4 SCOPE OF THE STUDY
The area of the study is delimited to restricted to the Rokanna industry Nekede.
This industry is chosen because it is centrally located at Nekede nearby federal Polytechnic Nekede where true study will be easy to carryout. Rokana industry is well known to me, being somebody who live at Nekede, also schooling at Nekede. That is why it is chosen as a case study and not only that, it has been functioning competitively in all its performances. Its products are everywhere in the market which also reach to the demand of people at a low rate.
The industry has been creating employment opportunities to the people as the same time doing its social responsibilities within the Nekeded where it is located.
But the scope of the study is limited to Rokana industry limited. Therefore is to check quality control of incoming materials and components to the manufacturing industries.
1.5 RELEVANCE OF THE STUDY
The stores in any organization has wide variety of function that it has performed as efficiently as possible. The way in which store overall efficiency and profitability of the organization.
At the other hand, as with other operations, store keeping is associated with the problem of facing the storekeepers on how to maintain adequate security of their stores, overstocking which lead to scarcity of money in store function.
As the case of store function, deterioration of materials due occur in a store in any organization also in some organization, unqualified personnel are employed in the stores as store keepers which leads organization to the getting losses due to bad store keeping but also due to less of efficiency in the factory.
1.6 LIMITATION OF THE STUDY
The research was carried out within limits owing to time and financial factors. It was not possible to collect the data and information necessary for this study due to excuses from the use staff in terms of inconveniences on item.
Also the research experienced come today and tomorrow syndrome as prevalent in some organization.
Finally, the volume of work and cost in involved were so much considering the areas cove7red in the organization (Rokana Industry Nekede).
1.7 DEFINITION OF TERMS
Impact: Can be defined as the effect or influence that an event situation etc has on someone or something.
Store: A store can be defined as holding materials which are awaiting dispatch to customers for further processing or final consumption.
Stock Control: Stock control is the process of maintaining a balanced stocks that are adequate to feed the current consumption rate that will ensure an uninterrupted production operations with due regard to minimum inventory investment.
Deterioration: In the course of time, most materials get deteriorated in the warehouse. This must be noted and written off the books or physical factors thus rendering such item worthless over time.
Obsolescence: Can been seen as serious source of loss with the ever increasing pace of technological advanced, products become outdated very quickly.
Even where the same product –is made for a number of years, details changes are made to its design to improve it performance or reliability, its appeal to the customer and to reduce its cost.
Pilferage: It is the extent of the loss due to pilferage depends very much on the industry concern for items having a direct appeal to the general and unter profitability tempting circumstance.
Inspection: In large organization with spectacle inspection departments, the inspection is usually undertaken by this department. Inspector have authority to accept or reject materials after inspection and endorse goods received notes accordingly unless separate inspection certificates are prepared.
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
AN ASSESSMENT OF PROCUREMENT STRATEGIES AND OPERATIONS ON THE SUPPLY CHAIN PERFORMANCE (A CASE STUDY...
CHAPTER ONE INTRODUCTION Background of the Study As the business environment keeps changing and becoming more complex, organizations search consist...More »
Item Type: Project Material | 57 pages | 2,065 engagements |
- 2.
BENEFITS OF TURNING SUPPLY CHAIN INTO REVENUE CHAIN IN PRODUCTION COMPANIES
ABSTRACT This study the benefits of turning supply chain into revenue chain in production companies, is very important using Nestle Nigeria plc as cas...More »
Item Type: Project Material | 45 pages | 9,043 engagements |
- 3.
EVALUATION OF THE USE OF TENDERS IN A PUBLIC SECTOR PROCUREMENT
ABSTRACT The subject matter of this study is to carefully evaluate the use of tenders in the public sector procurement. In a bid for better un...More »
Item Type: Project Material | 50 pages | 9,266 engagements |
- 4.
NEGOTIATION AS A COST REDUCTION TOOLS IN MATERIALS PURCHASES
ABSTRACT This research work on negotiation as a cost reduction tools on materials purchases a case study of Asaba Tex Nig. Ltd. The scope of thi...More »
Item Type: Project Material | 50 pages | 8,819 engagements |
- 5.
THE REASON FOR EFFICIENT DEVELOPMENT AND TRAINING OF STORES PERSONNEL IN AN INDUSTRY
ABSTRACT It has been observed, that the problem is not the number of stores personnel employed in the organization or the...More »
Item Type: Project Material | 50 pages | 8,003 engagements |
- 6.
INVENTORY POLICY AS A TOOL IN THE ATTAINMENT OF ORGANIZATIONAL GOALS
ABSTRACT Inventories policies in manufacturing companies has been a great assistance towards the attainment of organizational goal which aim not on...More »
Item Type: Project Material | 50 pages | 7,546 engagements |